Cleaning and Maintenance for Aqualuma lights.

Ideally lights should be coated with clear Prop speed or a thin film of Vaseline.

Vaseline can be reapplied periodically will vessel is still in the water.

Prop speed will last around the same time as bottom paint.

Or the lights should be wiped or brushed with a soft broom approximately every 4 weeks.

This will prevent excessive marine growth.

If maintenance is not carried out and excessive growth is experienced the housing can be high pressure cleaned and or scrubbed with a brush then repolished by hand or machine buffed using a plastics polish.

Machine buffing will take about 1-2 minutes and will bring the lights back to original clarity.